Elevate Pre-Installation Questionnaire

Elevate Pre-Installation Questionnaire
Please fill out this form to help us prepare for your upcoming Elevate installation. If you plan to outfit more than one bike with additional bike mounting kits, please submit a separate form for each bike.
Compatibility Criteria #1

Elevate is currently compatible with frames having the disc brake located above or behind the dropout. Frames that have the disc brake positioned in front of the dropout / inside the rear triangle are not currently compatible. If your frame is compatible, please continue filling out this form. If your frame is not compatible, please contact us to discuss options.
Compatibilty Criteria #2

Elevate requires the use of a 4-piston hydraulic brake caliper for clearance with the Rotor-Gear and the Drive Unit (4 piston brake calipers are longer and shallower vs 2-piston calipers being shorter and taller & cable-activated calipers are much larger and bulkier compared to hydraulic calipers). If you have a 2-piston or cable-activated brake caliper, we will follow up with you after reviewing this form to see if you would like to swap the brake caliper on your own/through your local shop prior to Elevate installation or if you would like us to do it in conjunction with installing Elevate.
Compatibilty Criteria #3

Elevate requires an ISO 6-bolt hub interface to attach the Rotor-Gear in place of the existing brake rotor. If your bike has Centerlock hubs, a Centerlock adapter is needed to install the Rotor-Gear. If you are already using an adapter with a 6-bolt rotor, it can be reused. If not, we can provide an adapter for $30.
Name*
Email*
example@example.com
Phone Number (Optional)
Please enter a valid phone number.Format: (000) 000-0000.
Elevate Order #*
Rider Height
Rider Weight
Bike Brand*
Bike Model*
Bike Model Year*
(Enter ??? if you do not know the model year)
What size rear wheel does your bike have?*

20"26"24"27.5" / 650b29" / 700cOther
How wide is your rear tire?*

1.00 - 1.49" / 25-38mm1.50 - 1.99" / 39-51mm2.00 - 2.49" / 51-64mm2.50 - 3.00" / 65-77mmOther
Existing disc brake rotor size?*

140mm160mm180mm200mm203mm220mm223mmNot SureOther
Does your rear hub have an ISO 6-bolt or Centerlock rotor mount?*

ISO 6-BoltCenterlockNot SureOther
If your hub has a Centerlock rotor mount, are you using a Centerlock rotor or an ISO 6-bolt rotor with an adapter?*

CenterlockISO 6-Bolt with AdapterNot SureOther
Please attach a photo of your disc brake, from the left side of the bike looking at the brake/rotor area (see example photo above for reference).*

Cancelof
Please attach a photo of the water bottle mounting area on your frame (see example photo above for reference)..*

Cancelof
Please attach a photo of your handlebar controls (see example photo above for reference)..

Cancelof
What size Elevate Rotor-Gear would you like? (Larger provides a little more torque both braking and when using Elevate, a little lower top speed, and is a bit heavier. Smaller is the opposite. For frames with Post Mount brake interface, the rotor size must always be one size larger than the minimum that the frame will allow. For example, frames with 180mm Post Mounts require a 203mm Rotor-Gear and frames with 160mm Post Mounts can use 180mm or 203mm. Frames with ISO brake mounts can use any size)*

180mm203mm223mmNot sure - please recommend
What do your climbs typically look like (or what do you want to plan for)?

Very steep (max effort/low cadence in easiest gear)Steep (don't have to use easiest gear but still relatively high effort/lower cadence)Moderate (can spin fairly easily with moderate effort if you want to)Mostly flat or gently rolling terrain
Would you like any additional Elevate parts added to your order?

Spare Battery ($395)Additional Bike Installation Kit (Mounting Bracket, Rotor-Gear, Battery Tray/Wiring Harness, Throttle $495)Replacement Output Gear ($40)Extra Rotor-Gear ($200)Spare Battery Charger ($125)
Additional Notes (Optional)
Should be Empty: