Language
  • English (US)
  • Deutsch
  • French (France)
  • Nederlands
  • Español
  • Norsk
  • Dansk
  • Svenska

  • Your® Liner can only be ordered by a Certified prosthetic technician. If you are a user and are curious about how Your® Liner could help you in your daily life, please get in touch with your CPO, or take a look at our partner centers:

    https://www.motiontech.ch/partner-centers

    If the present form seem not to display properly please use the Memo Sheet to collect key info, and come back later to place your order: Your® Liner Memo Sheet

  • 1. Request Type

  • REQUEST TYPE

    New patient ? Duplicate order with/without modifications ? Order from new scan ? Warranty claim ?
    • Help: Renewal with modifs -vs- Order from new scan ? 
    • Renewal order with modifications

      Starting from an existing model, indicate what you want to keep / change amongst the shape, thicknesses, aesthetic, suspension, etc.
      This form will NOT let you upload a scan if choosing this option.
      Order starting over from new scan
      		 User was already fitted with a Your® Liner, but you want to start over from scratch. Starting from scratch is more expensive than modifying an existing model, and results are subject to more uncertainty factors
    •  

    • PRESCRIBER

    • AMPUTATION TYPE

    • NOTE: For TF stumps with abundant soft tissue, please either:

      • Pre-compress the soft tissue with an elastic stocking to obtain homogeneous shape, OR
      • Take a plaster cast and send the scan of the positive model (do not apply reductions on the positive model)

    • FIT OF CURRENT LINER

    • Browse Files
      Drag and drop files here
      Choose a file
      Cancelof

    • TROUBLESHOOTING

      Help us pinpoint the issue so we can indicate the most relevant inputs we need to solve this case

    • Unsuitable product

    • Note: Satisfaction warranty claims (for unsuitable products) must be placed within 60 days of the seller's invoice.

    • Broken product

    • ISSUE MAY NOT COME FROM THE LINER

    • If the zones (e.g. pad / donut / DualShore zones) are higher than intended ; and/or you asked for a fully compensated liner but when trying it the pear shape isn't properly compensated, chances are the liner is stretched vertically on the limb. More infos in our FAQ.

      Unlike for most other liners, with a Your® Liner, you have to release the vertical tension while donning.

      If you are donning the liner with proper release of vertical tension and the problem persists, please take:

      • A video showing the liner being donned on the limb
      • Measurements of the liner on the limb and off the limb, showing how / why the zones are not placed correctly

    • We need to be 100% sure that the liner not vertically stretched, or we might correct a non-existing issue and create more problems down the line.

    • INPUTS FOR WARRANTY CLAIM

    • !! HELP US UNDERSTAND - SEND VIDEOS !!

       

      According to the info you filled in the Troubleshooting section, here are examples / recommendations of how to show us the issue.

    • Please take:

      • A video showing the liner being donned on the limb with proper releasing of vertical tension
      • Pictures with measurement tapes / ruler of the liner on and off the limb, showing how / why the zones are not placed correctly
    •  
    •  
    •  

    • ⬅  FIT OF LINER: DETAILS

      Unbearable pressure: User complains from pain / numbness very quickly. Liner can't even be donned.

      Too tight: Feeling numb or pain after wearing the liner for a while. Limb red or discoloured after wearing the liner.

      Good fit: Adequate compressions

      Not tight enough: Liner is in contact with skin but the compressions are too low. Signs of friction between liner and skin. Liner moves / slides on the skin during gait.

      Liner is larger than limb: Air pockets. No contact between limb and liner in some areas.

    • Browse Files
      Drag and drop files here
      Choose a file
      Cancelof

    • CHANGES COMPARED TO LAST LINER

      Tell us what we should keep / change compared to the latest liner we made for this user

    • ✅  WE WILL MAKE CHANGES IF NEEDED,
      ACCORDING TO YOUR INPUTS IN THE PREVIOUS MODULES

      This module enables you to access the full liner configurator. Use it ONLY IF you want to provide extra details or ask for extra modifications, besides the ones you already described in the Warranty Claim module.

    • Starting a liner from scratch from a new scan can result in a quite different shape.

      If you intend to keep the same socket, we strongly recommend modifying the already existing model. For that, select "Renewal order with modifications" instead of "Order stadring over from a new scan"

    •  
    •  

    • INDICATIONS

  • 2. Product Line Selection

  • LINER BODY TYPE

    UniShore / DualShore

  • ✅   Same as last liner

    To activate this module, please go back to Page 1 and select "Different from last liner" for "Silicone type".

  • Image-1151
  • Image-1152
  • Image-1153

  • DualShore Liners imply substantial extra-work and use of more advanced technologies compared to UniShore ones, and they thus comes at a higher price. Contact your MotionTech representative for more information: Contact Motiontech

    ATTENTION: We are currently in launch phase for DualShore liners. Expect much longer delays than for UniShore liners:

    Today's production leadtime for UniShore: Today's production leadtime for DualShore:
    {applicableLead} business days {applicable1263} business days

  • PEAR-SHAPED LIMB ?

    Not-compensated, Half-compensated, Fully-compensated or Waves

  • ✅   Same as last liner

    We will re-apply the same pear-shape treatment method as the previous liner (Not-compensated ; Half-compensated ; Fully-compensated or Waves).

    To activate this module, please go back to Page 1 and select "Different from last liner" for "Thicknesses".

  • Image-620
  • Image-621
  • Image-622
  • Image-1100
  •  

  • ERROR: If this limb is really pear-shaped, the provided circumference in 1st line of the above table should be lower than in the 2nd line.

  • => Max circumference is bigger than Min circumference by: {gtLargest}%

  • Image-1109
  • Image-1110
  • Image-1111
  • Image-1112
  • Image-1113
  • Image-1114
  • Image-1115
  • Image-1116
  • Image-1117
  • Image-1118
  • Image-1119
  • Image-1120
  • Image-1121
  • Image-1122
  • Image-1123
  • Image-1124
  • Image-1125
  • Image-1126
  • Not compensated Half compensated Fully compensated Waves
    Donnable Donnable Donnable Not necessary
  • Not compensated Half compensated Fully compensated Waves
    Donning can be difficult Donnable

    		 Donning can be difficult Donnable
  • Not compensated Half compensated Fully compensated Waves
    Donning very difficult Donning can be difficult Donning very difficult Recommended
  • Not compensated Half compensated Fully compensated Waves
    Donning impossible Donning very difficult

    Donning
    impossible

    		 Recommended
  • Not compensated Half compensated Fully compensated Waves
    Donning impossible Donning impossible Donning impossible Only viable option
  • Not compensated Half compensated Fully compensated Waves
    Donning impossible Donning impossible Donning impossible

    Uncharted
    territory
  • Image-501
  • Image-502
  • Image-503
  • Image-504
  • Image-1136
  • Image-1138
  • Image-1139
  • Image-1137
  • Image-1140

  • Making Wave Liners implies substantial extra-work and use of more advanced technologies compared to Liners without the Wave technology, and thus comes at a higher price. Contact your MotionTech representative for more information: https://www.motiontech.ch/contactmotiontech

    ATTENTION: We are currently in launch phase for Wave liners. Expect much longer delays than for non-waves liners:

    Today's production leadtime for Non-waves: Today's production leadtime for Waves:
    {applicableLead} business days {applicable} business days

  • WARNING: For limbs with a circumference difference of 30% or more, a liner without waves will be very difficult / impossible to don and dof.

    If ordering a liner without waves for such a limb, we will not accept warranty claims based on donning & doffing being too hard.

  • PRODUCT CODE

  • Based on your above choices, your product code is: {productCode1143}

  • 3. Hardness & Thickness

  • SILICONE TYPE

  • ✅   Same as last liner

    To activate this module, please go back to Page 1 and select "Different from last liner" for "Silicone type".

    • Help: Shore hardness selection guidelines 
    • Image-173
    • Image-246
    • Image-272
    • Image-306
    • Image-643
    • Image-649
    • Image-664
    • Image-701
    •  

    • Image-416
    • Image-417
    • Image-418
    • Image-419
    • Image-420
    • Image-421
    • Image-422
    • Image-423
    • Image-424
    • Image-425
    • Image-426
    • Image-427

    • ERROR: For DualShore liners, Main and Secondary silicone should not be the same.

    • WARNING: Relax silicone should be used only for patients with VERY limited activity levels. By still choosing Relax silicone for a {activityLevel} patient like {patientName}, durability will be limited, and you can not place warranty requests in case of failure / breakage of the silicone body of Your® Liner.

      We recommend choosing Active silicone instead.

    • WARNING: Dynamic silicone might make the donning and doffing harder. You indicated that {patientName} has {prehensionAbility} with his prehension abilities. Are you sure this is the right choice for him ?

    • THICKNESS CONTROL

      We'll apply the base thickness profile shown above. Use this section to modify the local thicknesses of the liner.

    • THICKNESS & HARDNESS CONTROL

      We'll apply the main silicone in the base thickness profile shown above. Use this section to indicate where you want the secondary silicone to be applied, and / or control the local thicknesses of the liner.

    • THICKNESS CONTROL

      Use this section to give indications on what you would like for the local thicknesses of the liner.

    • THICKNESS & HARDNESS CONTROL

      Use this section to give indications on what you would like for the local thicknesses of the liner, and where you would like the secondary silicone to be applied

    • Depending on the silicone type of the previous liner, we will apply the corresponding default thickness profile. You can have a look at our default thickness profiles by clicking here.

    • ✅   Same as last liner

      To activate this module, please go back to Page 1 and select "Different from last liner" for "Thicknesses".

    • ✅   Same as last liner

      To activate this module, please go back to Page 1 and select "Different from last liner" for "Thicknesses".

      THIS DOES NOT MEAN THIS LINER WILL FIT IN THE PREVIOUS SOCKET. Indeed, when starting from a new scan, there is a bit of variability in how thicknesses are applied in the design process, and even with our best efforts, the thicknesses might be located slightly differently.

    • ✅   Same thicknesses as last liner

      As you requested on Page 1, we will re-apply the same thicknesses as the last liner. The Zones table below is still open so you can indicate where you want the main / secondary silicone to be applied.

    • ✅   Same thicknesses as last liner

      As you requested on Page 1, we will re-apply the same thicknesses as the last liner. The Zones table below is still open so you can indicate where you want the main / secondary silicone to be applied.

      SAME THICKNESSES DOES NOT MEAN THIS LINER WILL FIT IN THE PREVIOUS SOCKET. Indeed, when starting from a new scan, there is a bit of variability in how thicknesses are applied in the design process, and even with our best efforts, the thicknesses might be located slightly differently.

    • Image-500

    • NOTE :You indicated that the patient "{patientName}" has a pear-shaped stump, and that you want the liner to compensate that shape to enable socket entry.

      The thicknesses described above will therefore be adapted where required to obtain a cylindrical [stump + liner] shape.

    • Help: Zones & Thickness control 
    • Image-201
    • Image-247
    • Image-273
    • Image-307
    • Image-635
    • Image-653
    • Image-668
    • Image-702
    •  

    • 3D MODEL VALIDATION

      Receive a link to check and validate the 3D model before we initiate production

    • ✅   Same as last liner

      An automated analysis of your inputs on Page 1 seem to indicate no modification of the existing 3D model is needed. 

      If you think the existing 3D model should be modified, please go back to Page 1 and cross check your inputs to see if there could be better suited indications.

  • 4. Suspension & Style

  • SUSPENSION

  • ✅   Same as last liner

    To activate this module, please go back to Page 1 and select "Different from last liner" for "Suspension".

  • Image-394
  • Image-395
  • Image-396
  • Image-386
  • Image-392
  • Image-393

  • WARNING: we normally do not make Pin-lock liners for {amputationLevel} patients. Are you sure this is what you want ?

  • Image-398
  • Image-401
  • Image-402
  • Image-454
  • Image-529
  • Image-530
  • Image-531
  • Image-637
  • Image-655
  • Image-670
  • Image-707
  • Default configuration for vacuum suspension (without sleeve):
  • Default configuration for anti-rotation:
  • Image-403
  • Image-404
  • Image-405
  • Default configuration for seal with sleeve:

  • You indicated that you want the same Liner Length as the previous liner of this user. If a contradiction is detected, the instructions for rings location will prevail.

    Should the length of the previous liner be too short to fit the silicone rings according to the above indications, we will lengthen the liner.

  • Image-391
  • Image-406
  • Image-407
  • Image-452
  • Image-532
  • Image-533
  • Image-534
  • Image-638
  • Image-656
  • Image-671
  • Image-708
  • Default configuration for vacuum suspension:
  • Default configuration for anti-rotation:
  • Image-327
  • Image-328
  • Image-329

  • TEXTILE COVER STYLE

    The style does not influence the price. Liner customisation is included no matter what you choose.

  • ✅   Same as last liner

    To activate this module, please go back to Page 1 and select "Different from last liner" for "Aesthetic Style".

  • Textile Warning EN

  • Image-428
  • Image-429
  • Image-430
  • Image-431
  • Image-432
  • Browse Files
    Drag and drop files here
    Choose a file
    Cancelof

  • ►  Link to our full catalog

  • Image-461
  • Image-535
  • Image-536
  • Image-537
  • Image-639
  • Image-657
  • Image-672
  • Image-709
  • Image-768
  • Image-839
  • Image-870
  • Image-894
  • Image-895
  • Image-896
  • Image-797
  • Image-850
  • Image-767
  • Image-858
  • Image-897
  • Image-898
  • Image-899
  • Image-930
  • Image-474
  • Image-595
  • Image-840
  • Image-871
  • Image-769
  • Image-862
  • Image-462
  • Image-931
  • Image-463
  • Image-771
  • Image-772
  • Image-860
  • Image-851
  • Image-945
  • Image-754
  • Image-465
  • Image-900
  • Image-901
  • Image-902
  • Image-903
  • Image-904
  • Image-905
  • Image-817
  • Image-756
  • Image-827
  • Image-757
  • Image-758
  • Image-852
  • Image-906
  • Image-907
  • Image-908
  • Image-466
  • Image-881
  • Image-909
  • Image-910
  • Image-911
  • Image-818
  • Image-735
  • Image-608
  • Image-798
  • Image-609
  • Image-773
  • Image-467
  • Image-829
  • Image-808
  • Image-774
  • Image-469
  • Image-872
  • Image-775
  • Image-873
  • Image-759
  • Image-882
  • Image-819
  • Image-599
  • Image-809
  • Image-766
  • Image-841
  • Image-830
  • Image-820
  • Image-810
  • Image-874
  • Image-760
  • Image-875
  • Image-883
  • Image-864
  • Image-736
  • Image-821
  • Image-842
  • Image-932
  • Image-843
  • Image-844
  • Image-822
  • Image-853
  • Image-737
  • Image-603
  • Image-776
  • Image-739
  • Image-741
  • Image-929
  • Image-912
  • Image-913
  • Image-914
  • Image-777
  • Image-475
  • Image-761
  • Image-865
  • Image-778
  • Image-884
  • Image-885
  • Image-800
  • Image-854
  • Image-477
  • Image-779
  • Image-831
  • Image-823
  • Image-811
  • Image-480
  • Image-876
  • Image-934
  • Image-780
  • Image-781
  • Image-935
  • Image-936
  • Image-886
  • Image-845
  • Image-937
  • Image-833
  • Image-782
  • Image-938
  • Image-763
  • Image-915
  • Image-916
  • Image-917
  • Image-783
  • Image-887
  • Image-802
  • Image-877
  • Image-856
  • Image-784
  • Image-764
  • Image-785
  • Image-888
  • Image-889
  • Image-468
  • Image-878
  • Image-786
  • Image-824
  • Image-846
  • Image-803
  • Image-847
  • Image-848
  • Image-867
  • Image-835
  • Image-765
  • Image-836
  • Image-814
  • Image-918
  • Image-919
  • Image-920
  • Image-869
  • Image-488
  • Image-825
  • Image-879
  • Image-921
  • Image-922
  • Image-923
  • Image-815
  • Image-787
  • Image-788
  • Image-805
  • Image-491
  • Image-789
  • Image-826
  • Image-806
  • Image-816
    • Fully Custom: Design Rules 
    • Image-714
    • Image-723
    • Image-724
    • Image-725
    • Image-726
    • Image-727
    • Image-728
    • Image-729
    •  
    • Browse Files
      Drag and drop files here
      Choose a file
      Cancelof

    • EXTRA TEXTILE

      Additional textiles to have matching style for liner & rest of the prosthesis (socket, cover, etc)

    • Note: You asked for {number} extra textiles. Only 1 textile is offered per order, the extra ones will be invoiced according to our Terms & Conditions.

    • ✅  Socket textile added to order

      We will make a textile with adequate dimensions to fit this user's socket

    • ✅  Cover textile added to order

      We need additional measurements to be able to adjust the textile, margins and fit the picture properly

    •  

    • ✅  Other textile added to order

      We need additional measurements to be able to adjust the textile, margins and fit the picture properly

    •  

  • 5. Shape Capture

  • LINER LENGTH

  • ✅   Same as last liner

    To activate this module, please go back to Page 1 and select "Different from last liner" for "Liner Length".

  • Image-1026
  • Image-971
  • Image-972
  • Image-973
  • Image-974
  • Image-975
  • For classical AK sockets, we lengthen liners 15cm beyond the Trochanter
  • For Sub-ischial sockets, we lengthen liners 10cm beyond the Ischium
  • For liners with proximal silicone rings: 10cm margin above highest ring For liners with proximal silicone rings, we add 10cm margin above highest ring.

  • SOFT TISSUE MANAGEMENT

  •  
  •  

  • Scan & Measurement position

    • Recommended scan positions for BK patients with soft tissues 

    •  

      For limbs with soft tissue, we recommend taking two scans so we can see how gravity affects the position of the soft tissues.

      Ideally, measurements should be taken for each scanning position.

      Position 1 - Sitting

      Position 2 - Standing
      ScanPosition_TT_Sitting_Horizontal ScanPosition_TT_Standing
      • Knee flexed at angle liner should have
      • Tibial segment horizontal compared to ground
      • Hands hold thigh to stabilise position
      • Knee flexed at angle liner should have
      • Tibial segment vertical compared to ground
      • Hands hold crutches or bar to stabilise position

       

    •  
    • Image-989
    • Image-990
    • Image-994
    • Image-997
    • Image-995
    • Image-991
    • Image-996
    • Image-992
    • Image-1017
    • Image-1018
    • Image-1019
    • Image-1020

    • MEASUREMENTS

      We use measurements only to control the dimensional accuracy of the scan
    • Help: How to take measurements so we interpret them correctly 

    •  

    • If the below input fields for measurements are not visible, please clear the cache of your browser and start this form again.

    • Image-1164
    • Image-1165
    • Image-1166

    • WARNING: marks visible on the 3D scan indicating the heights at which you took the measurements are crucial to help us be more accurate when we control the scan's dimensions.
      By not drawing marks on the stump before taking the scan, the risk of obtaining inadequate compressions is increased.

    • Position 1 -

      Sitting - Tibial segment horizontal
    • Image-1079
    •  
    • Image-1086
    • Image-1051
    •  
    • Image-1087
    • Image-1081
    •  
    • Image-1047
    •  

    • STUMP MARKINGS

      Markings visible on the scan (alternately in videos / photos) are not mandatory, but ensure a more controlled process
    • Missing marks on limb increases risk of poorly fitting liner.
    • You just made our lives easier. Our design team sends you hearts!

    • SCAN

    • ✅   No scan needed: Edit of existing 3D model

      To activate this module, please go back to Page 1 and select "Order from new scan" instead of "Renewal order with modifcations".

       

    • Browse Files
      Drag and drop files here
      Choose a file
      Cancelof

    • WARNING: You asked for the same knee angle as the last liner. If the uploaded scan has a different angle, we will edit the angle digitally, which generates some uncertainty on compressions.

      If you prefer to keep the flexion angle of this new scan, please go back to Page 1 and select "Different from last liner" for "Knee Flexion".

    • WARNING: Editing the flexion angle digitally comes with some uncertainty. If you have the possibility, we recommend taking the scan directly with the desired flexion angle.

    • KNEE FLEXION ANGLE

    • ✅   Same as last liner

      To activate this module, please go back to Page 1 and select "Different from last liner" for "Knee Flexion".

    • VIDEOS & PHOTOS

    • Help: What to show us in videos ? 
    •      

      A scan gives a static image. Use videos to give us a dynamic understanding.

      		 Talk ! A few words can sometimes make everything crystal clear. The above are only example. Show us what is relevant in your case !
    •  
    • Browse Files
      Drag and drop files here
      Choose a file
      Cancelof

  • 6. Shipping & Validation

  • DELIVERY DATE

  •  - -

  • Estimated delivery date for your order:

    In Europe:

    Out of Europe:

    from {minDefault455}

     to {maxDefault459}

    from {minDefault1194}

    to {maxDefault1196}

    *A re-computed date will be provided in the order confirmation e-mail

    *If we have to put this request on hold waiting for inputs from you, every lost day will be added to our target shipping date.

    *A production attempt can always fail, leading to unforeseen delays. MotionTech doesn't guarantee leadtime, these dates are only indicative.

    *Shipping time can vary depending on your location and on the transporter.

    • WHY THESE DATES ? 

    • OUR CURRENT PRODUCTION LEADTIMES:

      Liner
      with design:

      		 Liner
      without design      		 Extra days for
      DualShore Liners:      		 Extra days for
      Wave Liners:
      {currentLead}
      open days      		 {currentLead1219}
      open days      		 + {extraLead}
      open days

      + {extraLead1256}
      open days

    • Leadtime for your order:

      {displayedLead383} business days

      We are currently running in normal mode

      		 +

    • Leadtime for your order:

      {displayedLead383} business days

      We are facing high demand and are working to resorb lead time

      		 +

    • Leadtime for your order:

      {displayedLead383} business days

      We are facing very high demand and are working to resorb lead time

      		 +

    • *The herein indicated Leadtime may be wrong as the need for design, and extra days for DualShore or Waves may be wrongly accounted for. Wait for the Order Confirmation e-mail for a more accurate date.

    •  
    •  - -

    • Estimated delivery date for chosen shipping date:

      {minDesired462} - {maxDesired464} 

      ↳ Subsequent extra-charge: {extraCharge}

    • Estimated delivery date for chosen shipping date:

      {minDesired462} - {maxDesired464}

      ↳ Subsequent discount / extra-charge: {extraCharge} (no discount / extra-charge)

    • Estimated delivery date for chosen shipping date:

      {minDesired462} - {maxDesired464} 

      ↳ Subsequent discount: {extraCharge}

    • How are discounts / extra charges determined ? 
    • Image-548
    • Image-591
    • Image-592
    • Image-593
    • Image-644
    • Image-659
    • Image-674
    • Image-703
    •  
    •  - -
    •  - -
    •  - -
    •  - -
    •  - -
    •  - -
    •  - -

    • VALIDATE

    • Clear
    • Should be Empty: