• SUSPENSION ORDER / QUOTE FORM

  • Contact Details

    • Long Form Contact  
    • Request Type  
    • Attach an order  
    • Browse Files
      Cancel of

    • Attached Purchase Orders will only be accepted with valid Cruisemaster part numbers.
    • Quote  

    • You have requested a Quote.

      Once completed and submitted the Cruisemaster Customer Service Team will reply via email with a quote.
    • Order  

    • You are placing an Order.

      Once completed and submitted the Cruisemaster Customer Service Team will process the order. You will receive an Order Confirmation via email once processed. For non-account and COD customers this will also include a request for payment.
    •  -  -
      Pick a Date

    • Product Lead Time

      GT: 7 Days CRS2: 7 Days Unpainted / 15 Days Powder Coated

      XT: 7 Days Unpainted / 15 Days Powder Coated ATX: 7 Days

      (Important: The above are a guide only, lead time is confirmed on the order confirmation)

    • Collects  

    • Collects

      Please note collects are the full responsibility of the customer. Collects are intended for use by the customer directly, not for use in conjuction with a 3rd party freight company.

      Cruisemaster does not book collects on behalf of customers or provide extra paperwork to the individual collecting outside of the standard Cruisemaster documents.

      Collections are available;

      Mon - Thurs 8am - 4pm

      Fri 8am -12pm

      Customer will be notified once goods are ready to be collected via the contact details provided on this form.

    • Suspension Shortcut  
    • Suspension Details  

    • Suspension Builder

    • Learn more about the Cruisemaster Range of Suspensions

    • ATX Air  

    • Airbag Kit Inclusion

    • *'Single' refers to 'Single Axle' Configuration

      *'Tandem' refers to 'Tandem Axle' Configuration

      *The ATM is a critical specification for correct coil / bump stop combination selection. The ATM is the total weight of vehicle including full payload. Overstating or understating this capacity could lead to a detrimental effect on the ride, ride height and handling.

      Note: This is a non load-sharing suspension therefore wheels and tyres need to be rated to 120% of required capacity. Ratings assume a drawbar load of 7-12% ATM.

    • ATX Coil  

    • *'Single' refers to 'Single Axle' Configuration

      *'Tandem' refers to 'Tandem Axle' Configuration

      *The ATM is a critical specification for correct coil / bump stop combination selection. The ATM is the total weight of vehicle including full payload. Overstating or understating this capacity could lead to a detrimental effect on the ride, ride height and handling.

      Note: This is a non load-sharing suspension therefore wheels and tyres need to be rated to 120% of required capacity. Ratings assume a drawbar load of 7-12% ATM.

    • Brake Options ATX  
    • ATX Disc Spigots  

    • What is Spigot Size?

    • ATX Electric Spigots  

    • What is Spigot Size?

    • ATX Studs/Nuts/Shocks/Colour  

    • Cruisemaster Arm Colour Chart

    • XT Air  

    • All Cruisemaster XT Air Kits come standard with airbags and manual inflation points as part of the base kit.

      Additional functionality is achieved through the use of the kits above.

      Airbag Kit Inclusion

    • *'Single' refers to 'Single Axle' Configuration

      *'Tandem' refers to 'Tandem Axle' Configuration

      *The ATM is a critical specification for correct coil / bump stop combination selection. The ATM is the total weight of vehicle including full payload. Overstating or understating this capacity could lead to a detrimental effect on the ride, ride height and handling.

      Note: This is a non load-sharing suspension therefore wheels and tyres need to be rated to 120% of required capacity. Ratings assume a drawbar load of 7-12% ATM.

    • XT Coil  

    • *'Single' refers to 'Single Axle' Configuration

      *'Tandem' refers to 'Tandem Axle' Configuration

      *The ATM is a critical specification for correct coil / bump stop combination selection. The ATM is the total weight of vehicle including full payload. Overstating or understating this capacity could lead to a detrimental effect on the ride, ride height and handling.

      Note: This is a non load-sharing suspension therefore wheels and tyres need to be rated to 120% of required capacity. Ratings assume a drawbar load of 7-12% ATM.

    • XT C2F  

    • Calculating the Chassis to Face Measurement

      C/F is limited to a range of 175mm - 240mm for 10" brakes

      (1200Kg Coil extended range of 155mm - 240mm)

      C/F is limited to a range of 175mm - 260mm for 12" brakes

    • Straight  
    • Straight/Drop  
    • 10" Brake Options XT  
    • 12" Brake Options XT  
    • 10" / 12" Brake Options XT  
    • XT Disc Spigot  

    • What is Spigot Size?

    • XT Electric Spigots  

    • What is Spigot Size?

    • XT Studs/Nuts  

    • XT Shocks SW TW TS  
    • XT Shocks TW TS  
    • XT Shocks TS  
    • XT Shocks SW TW  
    • GT ATM  

    • *'Single' refers to 'Single Axle' Configuration

      *'Tandem' refers to 'Tandem Axle' Configuration

      *The ATM is a critical specification for correct coil / bump stop combination selection. The ATM is the total weight of vehicle including full payload. Overstating or understating this capacity could lead to a detrimental effect on the ride, ride height and handling.

      Note: This is a non load-sharing suspension therefore wheels and tyres need to be rated to 120% of required capacity. Ratings assume a drawbar load of 7-12% ATM.

    • GT C2F  

    • Calculating the Chassis to Face Measurement

    • GT Studs  
    • GT Shock Absorbers  
    • GT Colour  

    • Cruisemaster Arm Colour Chart

    • CRS2 ATM  

    • *'Single' refers to 'Single Axle' Configuration

      *'Tandem' refers to 'Tandem Axle' Configuration

      *The ATM is a critical specification for correct coil / bump stop combination selection. The ATM is the total weight of vehicle including full payload. Overstating or understating this capacity could lead to a detrimental effect on the ride, ride height and handling.

      Note: This is a non load-sharing suspension therefore wheels and tyres need to be rated to 120% of required capacity. Ratings assume a drawbar load of 7-12% ATM.

    • CRS2 C2F  

    • Calculating the Chassis to Face Measurement

    • 10" Brake Options CRS2  
    • 12" Brake Options CRS2  
    • CRS2 Disc Spigot  

    • What is Spigot Size?

    • CRS2 Electric Spigots  

    • What is Spigot Size?

    • CRS2 Studs/Nuts  

    • CRS Shocks singles / Twins  
    • CRS Shocks Twins Only  
    • Powdercoating XT CRS2  

    • Cruisemaster Arm Colour Chart

    • Standard Powder Coating  
    • Premium Powder Coating  

    • Suspension Selector  
    • Leaf Options  
    • Axle F/F  

    • Face to Face is the required measurement for determining axle length, it is the measurement between the outside face of the drum to the outside face of the opposing drum.

      Tolerance on finished product length +/- 5mm.

      Key Measurements

    • Sml Parts  
    • RMEX ATM  

    • The ATM is the total weight of vehicle including full payload. Overstating or understating this capacity could lead to a detrimental effect on the ride, ride height and handling.

      Short = 710mm length of leaf springs.

      Long = 850mm length of leaf springs.

      * All Tandem kits include "Short Springs"

      * (7L) refers to a 7 leaf spring pack

      * (8L) refers to a 8 leaf spring pack

    • RMX ATM  

    • The ATM is the total weight of vehicle including full payload. Overstating or understating this capacity could lead to a detrimental effect on the ride, ride height and handling.

      710mm length of leaf springs.

      Long = 850mm length of leaf springs.

      * (7L) refers to a 7 leaf spring pack

      * (8L) refers to a 8 leaf spring pack

    • Size 45 SR  
    • Size 45 S  
    • Size 50 S  
    • Size 50 60 SR  
    • Size 60 R  
    • Size 45 50 RSS  
    • Size 50 60 65 SRR  
    • Axle Only Size  
    • Brakes 10 12  
    • Brakes 12  
    • Brakes 10  
    • Brakes 12 Options  

    • Brakes 10 Options  

    • Ubolts  

    • (R) = Round (S) = Square

    • Extras  

    • Optional Extras

    • Submit  

    • Please note as per the Cruisemaster Australia Pty Ltd Terms and Conditions, 100% deposit is required prior to production for all Cash Sales.

      A Pro Forma will be sent via email after the order has been reviewed prompting payment. Production of MTO goods will not commence until payment is recieved.

      By clicking 'submit' you agree the Terms and Conditions of Cruisemaster Australia Pty Ltd .

      T&C's are available at https://cruisemaster.com.au/terms.

      Warranty information available at https://cruisemaster.com.au/warranty-policy/.

    • Should be Empty: