• General Instructions

    Test has 31 questions, split up into 5 sections. The time allotted is 30 minutes. The timer isn't visible  so keep your time. An additional 2 minutes has been allotted for initial set-up and going through instructions. Post  the allotted time, the test will be auto-submitted. We recommend you to save the responses at end of each section. Save button can be found below all question pages. You can navigate between the questions and change your response until the submission.  If you face any trouble attempting the test, reply to us in the same mail thread from which you had received the exam log-in credentials.

  • Get ready for the test

    Tip: Do not stay on questions that takes up time

  • Engineering Knowledge

    Section consists of 10 questions related to mechanical engineering
  • 1. The increase in depth of cut and feed rate _________ surface finish.
  • 2. The operation of making a cone-shaped enlargement of the end of a hole is known as
  • 3.The cutting tool in a milling machine is mounted on
  • 4. Inadequate production capacity ultimately leads to
  • 5. What is the reason of excessive friction between parts?
  • 6. Which of the following are assignable cause?
  • 7. The following line is used for dimension line
  • 8. What does dotted lines represent in engineering drawings?
  • 9. Metric thread of 10mm diameter is represented by
  • 10. Control chart is a

  • Aptitude test

    section consists of 10 questions
  • 1. 56% of Y is 182. What is Y?
  • 2. Y must score 40% marks to pass. He gets 20 marks and fails by 40 marks. The maximum marks of the exam are?
  • 3. Which of the following two ratios is greater 17:18 and 10:11?
  • 4. A man got Rs. 130 less, as simple interest, when he invested Rs. 2000 for 4 years as compared to investing Rs. 2250 for same duration. What is the rate of interest?
  • 5. Amit covers a distance at a speed of 24 km/hr in 6 min. If he wants to cover the same distance in 8 min, what should be his speed?
  • 6. If 12 men or 16 women can do a work in 172 days, how long will 21 men and 15 women to do the same work?
  • 7. Two pipes M and N can fill a tank in 22 hours and 33 hours respectively. In how much time will the tank be full, if both the pipes are opened simultaneously?
  • 8. Two trains A and B leave Kolkata for Sikkim at 8:00 pm and 8:30 pm respectively and run at 90 km/hr and 120 km/hr, respectively. At what distance from Kolkata, will the two trains meet?
  • 9. In a palace, supplies are available for 35 days for only 75 people. 15 Guests arrive in the palace for vacation on day 1 itself. For how many days will these supplies be sufficient for all these people?
  • 10. Joe is walking towards North for 15 miles, turns left and walks another 10 miles. He then turns right and walks 10 miles. Now, he again turns right and walks 30 miles. Which direction is he from Starting point?

  • General Awareness

    section consists of 5 questions
  • 1. GST stands for
  • 2. Which among the following does not belong to India's major large-scale industries?
  • 3. Which is called as the heavy engineering industry?
  • 4. Tier 1 companies are always:
  • 5.Which is the largest 2 wheeler company in the World in terms of sales

  • Verbal Ability

    section consists of 5 questions
  • 1. The first portion 1)/ of the book was dull, 2)/ the later part 3)/ was interesting. 4)/ No error 5)
  • 2. We cannot handle 1)/ this complicated case 2)/ unless full details 3)/ are not given to us. 4) No error 5)
  • 3. Until you (1) / do not apologize (2) / you will not be (3) / permitted to go outside. (4) / No Error (5)
  • 4. Identify correct spelling
  • 5. Identify correct spelling

  • Situation handling

    Section consists of 1 question
  • You are working as a graduate trainee in an manufacturing company and are currently part of an international project team looking at new routes to market. During a conference call you are finding it difficult to understand what one of your colleagues is saying. She is a graduate trainee like you and you have met her a few times during a couple of conferences you both attended and you got on well. Her accent is very strong and she has a tendency to speak very quickly when she is nervous. She is one of several people dialling in from outside of India. You are in a meeting room with the project lead and a couple of other colleagues. You can see that your colleagues are also finding it difficult to understand her. What would you do?
  • Should be Empty: