Edge Banding Checklist
Complete this checklist to ensure all edge banding process steps and quality checks are performed accurately.
Operator Name
*
First Name
Last Name
Date of Inspection
*
 -
Month
 -
Day
Year
2 digit month, 2 digit day, 4 digit year
Date
Hour Minutes
AM
PM
AM/PM Option
Job/Batch Number
*
Machine/Equipment Used
*
Please Select
Edge Bander A
Edge Bander B
Edge Bander C
Other
Panel Material Type
*
Please Select
Particle Board
MDF
Plywood
Other
Panel Thickness (mm)
*
Pre-Operation Machine Check
*
Cleaned and dust-free
Guards in place
Blades/rollers in good condition
Adhesive tank filled
Other
Adhesive Type
*
Please Select
EVA
PUR
Hot Melt
Other
Edge Band Material Check
*
Correct color/finish
Correct thickness/width
No visible damage
Material loaded correctly
Other
Edge Banding Process Parameters
*
Rows
Set Value
Actual Value
OK?
Feed Speed (m/min)
1
Glue Temperature (°C)
2
Pressure (bar)
3
Visual Inspection - Finished Edges
*
No gaps or open joints
No excess adhesive
Smooth edges, no chipping
Consistent color/finish
Other
Were any defects observed?
*
No defects
Yes (please specify below)
If defects observed, describe the issue and corrective action taken
Safety Compliance Check
*
Personal protective equipment worn
Emergency stop tested
Work area clean and free of obstructions
Other
Additional Comments or Notes
Submit Checklist
Should be Empty: