Endoscope Reprocessing Quiz
Test your knowledge on the essential steps and best practices for endoscope reprocessing.
Full Name
*
First Name
Last Name
Email Address
*
example@example.com
Department/Unit
Which of the following is the first step in endoscope reprocessing?
*
Pre-cleaning at point of use
High-level disinfection
Leak testing
Storage
Select all items that must be checked before starting endoscope reprocessing.
*
Personal protective equipment (PPE) is worn
Reprocessing area is clean and ready
Endoscope is tagged for maintenance
All required detergents and disinfectants are available
Other
After manual cleaning, which test is typically performed to check for endoscope leaks?
*
Pressure test
Visual inspection
Leak test
Functionality test
How long should an endoscope remain in the high-level disinfectant solution (according to manufacturer instructions)?
*
1 minute
5 minutes
10 minutes or as specified by manufacturer
30 minutes
Rate your confidence in performing endoscope reprocessing according to protocol.
*
1
2
3
4
5
Which of the following steps are part of proper endoscope storage?
*
Hang vertically in a well-ventilated cabinet
Store in a closed container
Ensure channels are dry
Allow endoscope to touch the floor
Match each reprocessing step to its correct description.
*
Rows
Step Description
Pre-cleaning
Removal of gross debris
Immersion in disinfectant
Testing for leaks
Drying and storage
High-level disinfection
Removal of gross debris
Immersion in disinfectant
Testing for leaks
Drying and storage
Leak testing
Removal of gross debris
Immersion in disinfectant
Testing for leaks
Drying and storage
Storage
Removal of gross debris
Immersion in disinfectant
Testing for leaks
Drying and storage
Briefly describe the importance of documenting each stage of endoscope reprocessing.
*
What action should be taken if an endoscope fails the leak test?
*
Proceed with high-level disinfection
Send for repair and do not use
Repeat the test and continue if passed
Store the endoscope as usual
Submit Quiz
Should be Empty: