Steam Trap Monitoring System Inspection Checklist
Use this checklist to record steam trap monitoring inspections, capture measurements and condition findings, and note required corrective actions.
Inspection Identification
Site/Facility Name or Location
*
Department or Area/Line
*
Please Select
Maintenance
Production
Utilities
Operations
Engineering
Other
Inspector Name
*
Inspection Date
*
 -
Month
 -
Day
Year
2 digit month, 2 digit day, 4 digit year
Date
Inspection Time
*
Hour Minutes
AM
PM
AM/PM Option
Steam Trap or Asset ID/Tag Number
*
System or Equipment Name/Section
*
Steam Trap Details
Trap Type
*
Please Select
Thermodynamic
Thermostatic
Float & Thermostatic
Inverted Bucket
Bucket
Other
Service / Application
*
Heating
Process
Tracing
Condensate Return
Other
Connected System Area
*
Operating Status Before Inspection
*
Operating
Isolated
Bypassed
Unknown
Inspection Measurements and Condition
Inlet Temperature
Outlet Temperature
Pressure Reading
Condensate Discharge Behavior
Please Select
Normal
Continuous steam loss
Blocked
Intermittent
Unknown
Audible or Ultrasound Leak Indication
Please Select
No indication
Possible indication
Confirmed leak
Unknown
Visible Leak or Corrosion Observed
Please Select
No
Yes - leak
Yes - corrosion
Yes - both
Unknown
General Condition Notes
Findings and Corrective Action
Defect Severity
*
Low
Medium
High
Critical
Maintenance Action Required
*
No Action
Monitor
Repair
Clean
Replace
Re-inspect
Recommended Corrective Action Details
Target Completion Date
 -
Month
 -
Day
Year
2 digit month, 2 digit day, 4 digit year
Date
Follow-up Required
*
Yes
No
Inspector Name Confirmation
First Name
Middle Name
Last Name
Submit Inspection
Should be Empty: