RS-485 Access Control System Configuration Checklist Form
Use this form to review and verify RS-485 access control system setup, wiring, communication settings, device addressing, and final test status.
System and Site Details
Project / Site Identifier
*
Installer / Technician Name
*
First Name
Last Name
Date of Configuration
*
 -
Month
 -
Day
Year
2 digit month, 2 digit day, 4 digit year
Date
System Purpose / Area
RS-485 Device and Bus Configuration
Controller / Model Family
*
Number of Connected RS-485 Devices
*
Device Addressing Method
*
Please Select
Automatic
Manual
Mixed
Other
Bus Topology
*
Daisy Chain
Star
Mixed
Other
Wiring and Signal Verification
Wiring polarity verified
*
Pass
Fail
Needs attention
Continuity and signal integrity verified
*
Pass
Fail
Needs attention
Cable type used
*
Please Select
Twisted pair
Shielded twisted pair
Unshielded twisted pair
Multi-conductor cable
Other
Signal termination and grounding status
Termination resistor installed
Termination resistor not installed
Shield grounded at one end only
Shield grounded at both ends
Ground not connected
Other
Communication Settings and Device Inventory
Baud Rate
*
Please Select
9600
19200
38400
57600
115200
Parity
*
Please Select
None
Even
Odd
Stop Bits
*
Please Select
1
2
Device Address Range or Assigned Addresses
*
Connected RS-485 Devices
*
Power, Testing, and Final Status
Power Supply Status
*
Pass
Fail
Partial
Not Tested
Grounding and Shielding Verification
*
Pass
Fail
Partial
Not Tested
Communication Test Result
*
Pass
Fail
Partial
Not Tested
Alarm or Door Event Test Result
*
Pass
Fail
Partial
Not Tested
Final Notes on Unresolved Issues or Corrective Actions
Submit Checklist
Should be Empty: