EDM-Drilled Cooling Hole Inspection Checklist Form
Complete this checklist to document and verify EDM-drilled cooling hole inspections. Ensure all sections are accurately filled for quality assurance.
Part or Job Identification
*
Inspection Date
*
-
Month
-
Day
Year
Date
Inspector Name
*
First Name
Last Name
Workpiece/Component Identification
*
Cooling Hole ID or Location
*
Dimensional Measurement (Diameter, mm)
*
Visual Inspection Findings
*
Burrs Present
Blockage/Obstruction
Surface Irregularity
No Visual Defects
Inspection Status
*
Pass
Fail
Rework Required
Defect Notes (if any)
Corrective Action or Rework Notes
Final Approval / Verification
*
Approved
Rejected
Submit Inspection Checklist
Should be Empty: