On takeoff or missed approach, do not engage the autopilot below:
400 feet AGL
200 feet AGL
800 feet AGL
The minimum altitude for use of the autopilot on a non-precision approach is:
Touchdown
50 feet below MDA/DA
50 feet AGL
What is the RECOMMENDED CROSSWIND COMPONENT for the following conditions/parameters? Runway Condition Code: 6, Surface Condition: DRY, Takeoff Crosswind Component (Split Scimitar Winglet)
37 knots
25 knots
33 knots
What is the RECOMMENDED SEVERE TURBULENCE PENETRATION SPEED for CRUISE?
280 knots / Mach .76
270 knots
TURB N1 setting from cruise page
What is the RECOMMENDED CROSSWIND COMPONENT for the following conditions/parameters? Runway Condition Code: 5, Surface Condition: 1/8 inch water, Takeoff Crosswind Component (Split Scimitar Winglet)
34 knots
25 knots
40 knots
What is the RECOMMENDED SEVERE TURBULENCE PENETRATION SPEED for CLIMB and DESCENT?
TURB N1 setting
280 knots / Mach .76
275 knots
Icing conditions exist in flight when:
Total Air Temperature is 10°C or below and visible moisture is present
Airframe icing is evident
Total Air Temperature is 15°C or above and visible moisture is present
What is the maximum takeoff/landing tailwind component for the B737?
15 knots
10 knots
20 knots
LEVEL CHANGE (LVL CHG) on final approach is not to be used below:
1,000 feet AFE
50 feet above MDA/DDA
1,500 feet AFE
Max flap extension altitude is:
30,000 feet
40,000 feet
20,000 feet
Icing conditions exist on the ground and for takeoff when the ____ and ____, or while operating on ramps, taxiways, or runways where snow, standing water, or slush may be ingested by the engines or freeze on the engines, nacelles, or engine sensor probes.
Outside air temperature is 10°C or below; visible moisture in any form is present (i.e., clouds, fog/mist with visibility of 3 miles or less, rain, snow, sleet, or ice crystals)
Outside air temperature is 10°C or below; visible moisture in any form is present (i.e., clouds, fog/mist with visibility of 1 mile or less, rain, snow, sleet, or ice crystals)
Outside air temperature is 5°C or below; visible moisture in any form is present (i.e., clouds, fog/mist with visibility of 3 miles or less, rain, snow, sleet, or ice crystals)
Icing conditions exist in flight when the ______ or less, and _______
Total air temperature 10°C or below; visible moisture in any form is present (i.e., clouds, fog/mist with visibility of 3 miles or less, rain, snow, sleet, or ice crystals)
Total air temperature 10°C or below; visible moisture in any form is present (i.e., clouds, fog/mist with visibility of 1 mile or less, rain, snow, sleet, or ice crystals)
Total air temperature 5°C or below; visible moisture in any form is present (i.e., clouds, fog/mist with visibility of 3 miles or less, rain, snow, sleet, or ice crystals)
Icing conditions exist on the ground and for takeoff when:
Outside air temperature is 15°C or above and visible moisture is present
Total air temperature is 10°C or below and there is water on the ramp or taxiway
Outside air temperature is 10°C or below and visible moisture is present
What is the RECOMMENDED CROSSWIND COMPONENT for Landing on a DRY Runway?
25 knots
33 knots
37 knots
The minimum altitude for use of the autopilot on an ILS approach (no autoland) is:
Touchdown
50 feet below MDA/DA
50 feet AGL
What is the RECOMMENDED CROSSWIND COMPONENT for Landing on a WET Runway?
25 knots
33 knots
37 knots
What is the RECOMMENDED CROSSWIND COMPONENT for Takeoff on a DRY Runway?
37 knots
25 knots
33 knots
What is the RECOMMENDED CROSSWIND COMPONENT for Takeoff on a WET Runway?
25 knots
33 knots
37 knots
Calculation Correction
Score
Submit
Should be Empty: