Impact Wrench Maintenance Checklist Form
Complete these checks to document routine impact wrench maintenance.
Equipment identification
Asset or equipment tag is present and legible
Make and model are identifiable
Serial or tracking label is present and legible
General inspection
Housing and handle inspected for cracks or damage
Trigger and controls inspected for damage or sticking
Anvil, socket retainer, and other attachments inspected
Cords, connectors, or air fittings inspected, as applicable
Cleaning
Exterior wiped clean
Air vents and openings cleared of debris
Anvil and attachment area cleaned
Lubrication
Lubrication points checked against manufacturer guidance
Required lubricant applied
Excess lubricant wiped away
Fasteners and attachments
Accessible fasteners checked for looseness
Loose fasteners tightened according to manufacturer guidance
Socket and attachment fit checked
Battery or power supply
Battery condition and charge checked, if applicable
Battery contacts checked and cleaned, if applicable
Power cord, plug, or air supply checked, as applicable
Power source reconnected or secured correctly for testing
Functional checks
Tool starts and stops normally
Forward and reverse controls operate correctly
Operation checked for unusual noise or vibration
Tool operates without visible air leaks or other abnormal signs, as applicable
Defects and follow-up
No defects observed during maintenance
Defects identified and documented for follow-up
Tool removed from service if a safety-related defect was found
Maintenance actions completed
Required cleaning completed
Required lubrication completed
Required adjustments or tightening completed
Parts or supplies requiring replacement noted for follow-up
Completion details
Maintenance completed and tool left in a safe condition
Tool returned to its designated storage location
Maintenance record updated
Follow-up needed communicated to the responsible team
Submit Checklist
Should be Empty: