1
Date of Inspection
2
Client Name
3
Client Information
Client Name
Physical Address
Town/City
VT
NH
State
Zip code
Mike Hall, CSIA Certified Chimney Sweep #8326
Jeff Poirier, CSIA Certified Chimney Sweep #10008
Steven Reed, CSIA Certified Chimney Sweep #10492
Jacob Clark, CSIA Certified Chimney Sweep #9387
Jonathan White, CSIA Certified Chimney Sweep #10747
Michael Bedor, CSIA Certified Chimney Sweep #9514
Paul Bianco, CSIA Certified Chimney Sweep #7441
Alan Albandia, CSIA Certified Chimney Sweep #8729
Technician Name
4
Photo of house:
Drag and drop files here
Select files to upload
Max. file size: 10.6MB
Cancelof
5
Location of appliance?
Basement
Closet on 1st floor
Closet on 2nd floor
Laundry room
Bathroom
6
Picture of appliance:
Drag and drop files here
Select files to upload
Max. file size: 10.6MB
Cancelof
7
Appliance Information
Brand of appliance
Model of appliance
Direction of dryer vent from under dryer
Electric
Electric
Gas
Other
Gas/Electric
Approximate length of transition duct
Approximate length of exhaust duct
Number of 45 degree bends in system
Number of 90 degree bends in system
8
The coiled, flexible duct that runs out of the dryer is called a transition duct. This allows the dryer to be placed relatively close to the rigid exhaust duct and also makes it easy to move the dryer around a short distance for cleaning or maintenance.Is the transition duct properly installed (correct material, under 8' in length and free of damaged)?
The transition duct was properly installed and free of damages.
INCORRECT MATERIAL PLASTIC - The transition duct was constructed of plastic flexible ducting. This type of ducting is flammable and should not be used to vent dryers.
LONG RUN - The transition duct extended over 8' in length. Flexible duct should only be used for a maximum of 8" before rigid ducting is used. This long length can cause more lint build up and longer drying time.
KINKED OR CRUSHED - The transition duct was kinked/crushed. This hinders the air flow which will cause more lint build up and longer drying time.
DISCONNECTED - The transition duct was disconnected from the rest of the venting system, allowing lint and products of combustion to vent into the home.
INCORRECT DIAMETER - The wrong diameter transition duct was used. This hinders the air flow which will cause more lint build up and longer drying time.
9
Picture of concerns with the transition duct:
Drag and drop files here
Select files to upload
Max. file size: 10.6MB
Cancelof
10
A dryer exhaust duct runs through the house to exhaust the air from the dryer to the exterior of the building.Is the transition duct properly installed (correct material, diameter, run length free of damage)?
The dryer exhaust duct was installed properly and was free of damages.
INCORRECT MATERIAL PLASTIC - The exhaust duct was constructed of plastic flexible ducting. This type of ducting is flammable and should not be used to vent dryers.
INCORRECT MATERIAL FLEXIBLE - The exhaust duct was constructed of flexible ducting. After the transition duct, only rigid ducting should be used. Flexible ducting in this area hinders the air flow which will cause more lint build up and longer drying time.
LONG RUN - The exhaust had a very long run out of the building. This is not ideal for air flow and proper venting. You will most likely experience longer drying times and will need to have the vent serviced more frequently.
KINKED OR CRUSHED - The exhaust duct was kinked/crushed. This hinders the air flow which will cause more lint build up and longer drying time.
DISCONNECTED - The exhaust duct was disconnected from the rest of the venting system allowing lint and products of combustion to vent into the home.
INCORRECT DIAMETER - The wrong diameter transition duct was used. This hinders the air flow which will cause more lint build up and longer drying time.
NOT INSULATED - The exhaust duct ran through a non-insulated area. When vents run through non-insulated areas condensation can occur inside the vent, causing a range of problems, from water leakage to more lint buildup and decreased air flow.
SCREWS USED - Screws were used to connect sections of ducting. Screws protrude into the vent and catch lint as it passes through the venting system.
CRIMPS INCORRECT - The dryer ducting is crimped on one side to secure one duct into the next. This crimped end should be pointed in the same direction as the flow of air. Your ducting was crimped in the wrong direction, which allows lint to build up in these areas.
11
Picture of concerns with exhaust duct:
Drag and drop files here
Select files to upload
Max. file size: 10.6MB
Cancelof
12
The dryer vent termination is the area where lint and the products of combustion exit the home. It is usually covered with a screened hood.Is the termination properly installed and free of damage?
The dryer vent termination is properly installed and free of damages
TERMINATION MISSING - The vent termination hood was not found. This could allow animals to climb into the vent and clog it.
TERMINATION DAMAGED - The vent termination was found to be in damaged condition. This could allow animals to climb into the vent and clog it, or possibly restrict the venting.
TERMINATION INSIDE BUILDING - The vent currently does not terminate on the exterior of the building but rather inside the building. This is a dangerous situation where products of combustion and combustible lint are venting inside the building.
TERMINATION NOT ACCESSIBLE - The vent terminated in an area that we were unable to access.
13
Picture of concerns with termination:
Drag and drop files here
Select files to upload
Max. file size: 10.6MB
Cancelof
14
Air Flow Information
Air test before sweeping
Air test after sweeping
Please explain any improvements made to the system
15
Suitability of System for Continued Use: This inspection report is designed to inform you about your chimney system so that you can make educated decisions on continued usage, possible upcoming repairs and the longevity of the system. Please understand that chimney construction in Vermont and New Hampshire goes unregulated, and in the majority of chimneys that we inspect we find some kind of code violation or issue with the construction/installation. We are left on a daily basis to make a judgment call on the safety of these systems and therefore your homes. We have decided to point out all safety concerns so that you can be made aware. However, some code violations and safety issues may be more serious than others. We encourage you to give us a call to have a discussion about the issues found in this inspection report.Is the system suitable for continued use?
Currently the system is suitable for continued use.
Currently the system is NOT suitable for continued use.
MORE INFO NEEDED - At this time I am unsure if the system is suitable for continued use. I will bring my findings back to the office and do more research in order to determine the suitability of the system.
Should be Empty: