SL Roller CSA - Verification of Competency

  • Roller - Verification of Competency

    Skyline Training & Assessing

  • This assessment is a verification of competency only in line with Conduct Roller Operations. This assessment does not replace a relevant state or national licence or provide a certificate of competency to the operator.

    This form is to be completed by the appropriate Assessor before an operator is to be allowed to operate a piece of plant.

    All operators of load shifting plant including excavators, rollers, articulated rear dump trucks, scrapers must:

    • Hold the relevant State / National License; or
    • Hold a Certificate of Competency for the Plant, from a Registered Training Organisation; or
    • Have received the approved training from a Registered Training Organisation and then be placed onTraining Log Book, with appropriate supervision

  • Please ensure your name matches that of your licence!

  • Date of Birth*
     - -
  • Clear
  • Rows
  • Browse Files
    Drag and drop files here
    Choose a file
    Cancelof
  • Browse Files
    Drag and drop files here
    Choose a file
    Cancelof

  • If No answered to any of the above the operator MUST NOT use the intended piece of plant or equipment.

    Please speak to a Supervisor immediately.

    • Theory Competency Checks 
    • What defects would you look for when conducting a routine check on the hydraulic system of the roller if fitted?*

    • Oops! That's not quite right. Please check your answer and try again.

    • If you found any damage or defects on a front end loader, you should continue to operate and report to your supervisor at your next break.*

    • Oops! That's not quite right. Please check your answer and try again.

    • Select an option to match the actions with the correct horn signal. ACTION: Starting the Equipment*

    • Oops! That's not quite right. Please check your answer and try again.

    • Select an option to match the actions with the correct horn signal. ACTION: Moving Forward*

    • Oops! That's not quite right. Please check your answer and try again.

    • Select an option to match the actions with the correct horn signal. ACTION: Moving in Reverse*

    • Oops! That's not quite right. Please check your answer and try again.

    • You can roll the edge of a fill in reverse.*

    • Oops! That's not quite right. Please check your answer and try again.

    • How far from high voltage power lines could you work a front end loader?*

    • Oops! That's not quite right. Please check your answer and try again.

    • How would you establish the capabilities and limitations of the roller that you are operating?*

    • Oops! That's not quite right. Please check your answer and try again.

    • What effect would a rough surface have on the operating speed of the roller?*

    • Oops! That's not quite right. Please check your answer and try again.

    • The roller should have a reverse warning device that operates to warn people the roller is travelling in reverse*

    • Oops! That's not quite right. Please check your answer and try again.

    • What would you do first if the roller started to fall over the edge?*

    • Oops! That's not quite right. Please check your answer and try again.

    • When using a vibratory roller what procedure should you adopt for the first run against the kerb on uncompacted soil?*

    • Oops! That's not quite right. Please check your answer and try again.

    • When should seat belts be worn?*

    • Oops! That's not quite right. Please check your answer and try again.

    • Where should any faults or repairs to be carried out be recorded?*

    • Oops! That's not quite right. Please check your answer and try again.

    • How long should you idle a machine before shutting engine down?*

    • Oops! That's not quite right. Please check your answer and try again.

    • Where possible what type of surface should be selected to park the roller on?*

    • Oops! That's not quite right. Please check your answer and try again.

    • When starting a new run, what do you need to ensure happens?*

    • Oops! That's not quite right. Please check your answer and try again.

    • When rolling with a vibratory roller what should be done before the roller is stopped?*

    • Oops! That's not quite right. Please check your answer and try again.

    • Clear
    • Assessor - Results & Comments 

    • Theory Component

    • Result

    • Practical Component

    • Rows
    • Result
    • Browse Files
      Drag and drop files here
      Choose a file
      Cancelof

    • Competency Assessor to Complete

      I certify that the above named operator has provided evidence that they are capable and authorised to operate the plant item on this project site.
    • Date
       - -
    • Clear
    • Should be Empty: