Framing Inspection Checklist

Framing Inspection Checklist
December 10, 2018
Project Manager Information
Customer Information
Customer Name:
Brandon A. Drake
Project Manager Performing:
Florence M. Bork
Job:
Frame Constructor
Project Manager Email Address:
projectmanager@example.com
Exterior Checklist
Check saddles to insure for 12" extention beyond brick walls
Punch Item
Punch Needed
insure for 12 extention
Check brick & siding elevations for proper exterior trim
Punch Item
Punch Needed
brick & siding elevations
Check porch beams for height & width and ceilings for 2x nailers installed.
Punch Item
Punch Needed
porch beams for height & width and ceilings
Check roof lines on hip ends & gables for straight
Punch Item
Punch Needed
roof lines on hip ends
Garage Checklist
Check for sill plate straps or anchor bolts 6' O.C max and no more than 12" from plant ends.
Punch Item
Punch Needed
Add sill plate anchor bolts
Check that temp stair built and fastened.
Punch Item
Punch Needed
Build Temporary box stair and fasten to rim
Check that any attic access(s) are framed per plan.
Punch Item
Punch Needed
Frame in attic access per plan location
Check for garage back jambs.
Punch Item
Punch Needed
Install 2x6 back jambs
Basement Checklist
Check for joist bridging or center span blocking.
Punch Item
Punch Needed
Install wood bridging
Check for all needed bearing blocks in floor container.
Punch Item
Punch Needed
Install bearing blocks per plan or as marked
Check that flat 2x10 blocking installed per plan at top of joists for kitchen counter point loads
Punch Item
Garage Checklist
Check for sill plate straps or anchor bolts 6' O.C max and no more than 12" from plant ends.
Punch Item
Punch Needed
Add sill plate anchor bolts
Check that temp stair built and fastened.
Punch Item
Punch Needed
Build Temporary box stair and fasten to rim
Check that any attic access(s) are framed per plan.
Punch Item
Punch Needed
Frame in attic access per plan location
Check for garage back jambs.
Punch Item
Punch Needed
Install 2x6 back jambs
Basement Checklist
Check for joist bridging or center span blocking.
Punch Item
Punch Needed
Install wood bridging
Check for all needed bearing blocks in floor container.
Punch Item
Punch Needed
Install bearing blocks per plan or as marked
Check that flat 2x10 blocking installed per plan at top of joists for kitchen counter point loads
Punch Item
Check 1st Floor joist layout (O.C. spacing, dbl joists, nailing pattern, etc.).
Punch Item
Punch Needed
joist layout spacing and joists
Stairs Checklist
Check for minimum 36" landing from stair tread nosing
Punch Item
Punch Needed
stair tread nosing
Check that required nailers are installed for drywall.
Punch Item
Punch Needed
Install 2x4 nailers for drywall lath underside of stairs
Check that stairs are set to proper height for floor covering selections.
Punch Item
Punch Needed
floor covering selections
Check to insure treads are level.
Punch Item
Punch Needed
insure treads
First Floor Checklist
Check that subfloor sheathing is nailed properly and spaced (6"/12" & 1/8" gap at all edge and end joints)
Punch Item
Punch Needed
Floor sheathing needs nailed off properly see painted areas
Check for bowed/crowned studs (mark all to be repaired)
Punch Item
Punch Needed
Repair or replace all bowed/crowned studs marked
Check door & window rough openings for correct size and location. No cap nails to be within 2" of (or) inside R.O.
Punch Item
Punch Needed
door & window rough openings
Check for plumb and squared walls.
Punch Item
Punch Needed
plumb and squared walls
Check that any field framed half or knee walls are framed and braced to joist.
Punch Item
Punch Needed
field and knee walls
Roof Checklist
Check all trusses for H-2.5's and connector hangers are installed with proper nails.
Punch Item
Punch Needed
H-2.5's and/ or other truss hangers need installed/nailed properly
Check all girder trusses are nailed or bolted per truss engineering specs.
Punch Item
Punch Needed
Girder truss(s) need nailed/bolted per specs
Check that all gable end wall trusses are strong-backed mid way & braced properly.
Punch Item
Punch Needed
Gable truss(s) need strong-back and/or bracing installed.
Check that required permanent bracing has been installed per truss engineering.
Punch Item
Punch Needed
Truss bracing needs installed/completed
About this template

Framing Inspection checklist is essential especially for a construction business to identify potential issues and to assure that equipment is working properly. Creating a checklist, however, is not an easy task. Try this Framing Inspection Checklist Template from JotForm. This template is a free, practical and useful tool in creating an audit report for your construction company.

If you are a contractor or an inspector, this template will be beneficial for you because it has all the basic information for an inspection checklist. If you would like it to be more comprehensive, add more details on the checklist and use the editing tool feature to modify the appearance of the form that is specific to your project.

Categories
Details
667 Clone
Created by
Jotform
Related templates
Daily Safety Inspection Report - PDF Templates

Daily Safety Inspection Report

Daily Safety Inspection Report Sample is an audit report, which is obviously crucial for any company to track the health and well-being of the employees. The fields in the template include equipment standards of workers.

Business
Supply Inventory Template - PDF Templates

Supply Inventory Template

Generate a supply inventory form with this free template. Drag and drop to customize. Easy to share. Fill out and e-sign from any device. Converts to PDF.

E-SignAudit Report
Technology Assessment Template - PDF Templates

Technology Assessment Template

This free Technology Assessment Template includes a checklist for operational technology, technology support structure, hardware modernization and technology network in all areas of the restaurant.

Information Technology
Job Safety Inspection Report - PDF Templates

Job Safety Inspection Report

Job Safety Inspection Report is another type of audit template to check whether a company is compatible with important safety measurements. This reports sample features critical fields on the safety of employees.

Insurance
Menu Compliance Audit Report - PDF Templates

Menu Compliance Audit Report

Menu Compliance Audit Report Sample provides you an effective way to report your findings each time you carry out menu compliance auditing. With Menu Compliance Audit Report PDF Template, health inspectors can easily create customized PDF reports.

Healthcare
Energy Audit Report - PDF Templates

Energy Audit Report

Energy Audit Report Template is used to assess the energy consumption of a company and how they can save more energy by optimizing the right items. In addition, you can easily modify the fields according to your immediate needs.

Services

These templates are suggested forms only. If you're using a form as a contract, or to gather personal (or personal health) info, or for some other purpose with legal implications, we recommend that you do your homework to ensure you are complying with applicable laws and that you consult an attorney before relying on any particular form.